Subject: No inbound traffic in the graphs
From: Andersson (217andersson-per@telia.com)
Date: Wed Aug 21 2002 - 14:40:40 CDT
Hello, I have a very simple network. So it shouldn´t be difficult to apply flowscan on it. But I can't get reliable stat on inbound traffic. Topologi is like following. There is one "big" router with one interface to an ISP for all outbound traffic and around 100 logical subinterfaces to an inside fiber network with around 5000 hosts. First I configured CampusIO.cf with default gateway to the border router at the ISP. => No inbound traffic showed up. Then I configured it with IfIndex, with no result. Lastly I configured nothing and to my surprise I got inbound traffic. After a while I tried ifIndex again with no result. So I switched back to nothing, to get back the inbound traffic, but no traffic showed up. Here I am. Don't know what to do. I would appreciate a good advice. Per -- Help mailto:majordomo@net.doit.wisc.edu and say "help" in message body Unsubscribe mailto:majordomo@net.doit.wisc.edu and say "unsubscribe flowscan" in message body Archive http://net.doit.wisc.edu/~plonka/list/flowscan/archive/
This archive was generated by hypermail 2b25 : Wed Aug 21 2002 - 14:42:42 CDT